The new airfoil as well as other well balanced features allow us to introduce an EN B certified tandem glider that meets all major requirements for professional use.

No matter how much the glider will be appreciated by paragliding professionals because it is light and well trimmed for excellent flight behaviour, it will be mostly the passengers who need easy take off, stable and smooth flight even in rough airs and great flair for safe and easy landing.

And this is the point where METIS 3 will excel: the classical V structure and optimised construction of the canopy and hard work of the test pilots streamed into a real paragliding experience for both the pilots and their passengers.


The main distinctive features are:

  • Excellent gliding ratio and maximum speed
  • Wide speed range
  • Efficiency climbing in thermals
  • Easy take off
  • Smooth landing with great flair
  • Well balanced handling with balanced yaw and roll and progressive pressure in the brakes
  • Low weight and high durability due the new materials




Each glider is delivered with:




R&D team comments


The task defined by the team was quite tricky. You have to bring the tandem that will be fun to fly for the pilot and easy to enjoy for the passenger who might suffer from airsickness. As neither of us wanted to land with the passengers’ pizzas in the equipment, we had to work hard to make the glider great to fly for a pilot and stable enough to deal with turbulences of strong Alpine thermals, for passengers.

As the passenger's safety ad comfort is a great issue for all of us, we wanted to make a glider which is easy to land with exceptional flair. At the take-off we wanted to avoid the usual rugby and football shouts when running after the inflation and the goal to make it a real experience for the passenger from the very beginning...

As the glider was a well behaved child from the very first prototype, we could spend half a year trimming and test flying the wing in many different conditions.

As far as the construction is concerned, it must be light and long lasting. Well, all the usual demands...

So, we used the usual motto we have: the METIS 3 has ALL the pieces it needs and ONLY the pieces it needs, it uses classical V structure, Light Nylon bridles structure the Mylar nose-reinforcements on the main ribs; they are removable and replaceable and are mainly meant to prevent the pilot from over-creasing the nose-part of the ribs while packing. Of course, for Sky Paragliders now traditional Adiprène vents-reinforcement are also used on the METIS 3 to ensure that the launching characteristics will remain throughout the whole lifespan of the glider.

So, this is what we did and the way we thought about the glider. it is up to you to test the glider with a passengers and let us know how is the job we did.


Technical info




METIS 34042
Layout surface (m2) 40,00 42,00
Layout span (m) 14,42 14,78
Layout aspect ratio 5,20 5,20
Projected surface (m2) 35,04 36,79
Projected span (m) 11,77 12,06
Projected aspect ratio 3,95 3,95
Number of cells 54 54
Weight of the glider (kg) 7,60 7,90
Take-off weight (kg) 110-210 120-220
Trim speed (km/h) 38-40 38-40
Min. speed (km/h) 24-25 24-25
Max. speed (km/h) 45-48 45-48
Max. gliding ratio >9 >9
Min. sink rate (m/s) <1,2 <1,2
Certification EN B / LTF B EN B / LTF B




Own colors



Customise the colours of your SKY glider

To design your own glider, use the tool below. When you have decided on your own unique colour scheme COPY the name of glider and colours picked (for example: METIS 3: Gold / Red Dragon / Deep Blue) into your order. ANY colour combination is available.

Gliders with personalised colours are available only at extra cost. The delivery time depends on the load of the workshop and may vary depending.

Enjoy the look of your unique SKY glider!







  • Panels and leading edge: Porcher Sport, SKYTEX 38, 38 g/m2
  • Ribs and diagonals: SKYTEX 40, 40 g/m2


 Risers: Mouka Tišnov, 25 mm (polyester)

 Quick links: Peguet, maillon 4,0 DI 








GAIA is the first glider in the Sky Paragliders range dedicated entirely to schooling. It is to be used on the training hills and for the first flights providing the schools with a perfect and reliable tool. The glider is excellent to fly and very stable. GAIA will also be the right first glider to discover the secrets and beauties of never ending thermals for those with limited budget. GAIA is one of the best quality/price glider made of high  quality materials to provide state of art overall quality.

The main distinctive features are:

  • Easy to get ready for the take off
  • Very easy take off
  • Well balanced handling to allow pilots quickly master the flying skills
  • Stable in the rough air
  • Performance easily usable
  • Intuitive and easy landing
  • Ease to fly
  • Presumable behavior in manouvres
  • EN LTF certification

Each glider is delivered with:

  • Porter ECO bag
  • T-shirt SKY TEAM 

Optional accessories:

GAIA is also delivered as a paramotoring wing and you can order special risers with the trimmer tabs, just the note the glider is not certified with trimmers tabs.


R&D team comments


The goal was to produce a robust glider while preserving the qualities of flight and Sky Paragliders touch, handling and feeling.



Colour scheme


Please, see the current standard combinations in the Download section below. 



Technical data


Layout surface (m2) 22,36 24,19 26,17 28,30
Layout span (m) 10,25 10,66 11,09 11,54
Layout aspect ratio 4,70 4,70 4,70 4,70
Projected surface (m2) 19,65 21,26 23,00 24,87
Projected span (m) 8,24 8,57 8,92 9,28
Projected aspect ratio 3,46 3,46 3,46 3,46
Number of cells 38 38 38 38
Take-off weight (kg) 58-75 68-90 82-107 98-130
Weight of the glider (kg) 4,40 4,60 5,00 5,10
Min. speed (km/h) 22 22 22 22
Trim speed (km/h) 36 36 36 36
Max.speed (km/h) 44 45 45 45
Sink rate (m/s) 1,2
Certification EN EN B EN B EN B EN B
Certification LTF LTF B LTF B LTF B LTF B






The canopy is made out of the material DOKDO produced by South Korean textile factory Dominico Textiles. To reach the high quality and increase the durability of the canopy, we combine several material and coatings. The upper panel are made of DOKDO-N20 DMF (WR), 36 grams per square meter. Profiles are made of DOKDO-N30 DFM. Download the original  technical data sheets.

The material is made of Nylon 6.6 fibres (PA fibres) produced by Du Pont. The weaving pattern is the so called RipStop structure.

Line scheme

The lines on the GAIA are of the highest quality and are supplied by the German firm EDELRID andCOUSIN TRESTEC. These lines create high resistance from mechanical abrasion as well as a high degree of length stability.

For the upper cascade we used ELDERID 7850–080 lines. These lines are one millimetre in diameter; the core is manufactured out of “dyneema” and the outer sheath from polyester. The lower lines are manufactured by COUSIN TRESTEC and main brake line are from EDELRID 7850–200.


The risers are made from 20 mm wide webbing, it is manufactured by our supplier MOUKA TIŠNOV. The suspension lines areconnected to the risers by means of quick links (maillons) made by the French supplier Maillon Rapide.








SKY SYSTEM II is the second generation of Sky Paragliders popular reserve. The RESERVE is ENLTF certified and guarantees the best safety. The reserve is only 1,5 kg (90 size), it deploys very quickly and the sink rate meets the demanding EN standard of 5.5 m/s.

The use of more affordable materials as well as standardised and automated manufacturing methods yields especially good value with all the values needed for the safe and relaxed flying.


Technical info

Surface (m2) 23,95 29,15 35,75
Number of panels  13 14 16
Max. take-off weight (kg) 90 110 135
Max. payload (kg) * 86 106 130
Sinkrate at max. payload (m/s) 5,5 5,5 5,5
Max. speed for opening (km/h) 115 115 115
Weight of the rescue (kg) 1,40 1,70 2,00
Certification EN 12491 / LTF EN 12491 / LTF EN 12491 / LTF
* weight of fully equipped pilot without the paraglider




Reserve: AF0801B - Parachute fabric

Lines: Lanex and Edelrid

Riser: 20mm  strap - Mouka Tišnov

Carbine: maillon 6,0 CI - Maillon Rapide








AXEL 2 is harness that will be mostly appreciated by pilots looking for safety and comfort, low weight and simple adjustments.

Compared to the old version, new AXEL 2 offers a completely different concept; the harness strap system uses our Four S system – SKY SAFETY STRAP SYSTEM that enabled the R&D team to develop  the harness with maximum safety, comfort and easy adjustment foremost.

The reserve is accommodated under the seat (right in the centre of gravity). The release handle is situated on the right side of the harness (an option for left handed people is available on demand).

The main features are:

  • Low weight – 4.1 kg in M size (complete harness – with back protector, main carabiners, speed system)
  • Special 14 cm (for sizes S & M) or 15 cm (for sizes L & XL) back protection coated in a special permeable material ABS system
  • ABS system
  • Comfort and several adjustment points
  • Rescue in the centre of gravity with a smart flap system
  • Integrated Handy Kit – includes packing line for easy of installing a reserve into the container, spare loops segment and safety rubber bands to secure the needles
  • A lot of space to accommodate all you need in the back pocket or in the side pockets

AXEL 2 is supplied in S, M, L and XL sizes; please check the recommended size table. The comfort is crucial when choosing the size of the harness and it is highly recommended you try before you buy. Contact your reseller for the best size for you.

The harness is delivered with:

The harness could be equipped with:


Technical info


Pilot's Height (cm) 155-171 165-182 175-193 186-203
Board Width (cm) 32,5 34,9 37 39,5
Board Depth (cm) 34,5 36,8 39 41,5
Suspension Points Height (cm) 42 45 48 51
Chest Strap Range (cm) 37-43 40-46 43-49 46-52
Harness Weight* (kg) 4,00


4,60 4,70
Test EN 1651 EN 1651 EN 1651 EN 1651


  • Total harness weight (includes harness, protector, carabiners, speed system, rescue risers)




Team Sky

The Team Sky flying suit is a high tech overall using the latest, fully functional materials and many technical design techniques to ensure pilot comfort. The flying suit is manufactured in the SKY TEAM colours. Join our team!

Distinctive features:

  • three main zippers
  • easy to adjust belt
  • micro fleece lined collar for soft comfort
  • several pockets within an easy reach with safety loops to fix a camera or radio
  • variometer fixing straps
  • elastic rubber bands to fix the legs
  • the design combines fully functional materials Iceland (CORDURA®) and Power (CORDURA®) to increase the durability and comfort of the suit
  • comes complete with a zippered pouch for easy packing and storage

It is strongly recommended that you consult the size table to choose the correct size. Better still, try before you buy – consult your local dealer.

Also you can compare this suit with the other flying suits offered by SKY Paragliders: STREAMLINE eco and STREAMLINE GLX.


Technical info

A (cm) 164 172 180 188
B (cm) 88 95 102 109
C (cm) 76 83 90 97
D (cm) 94 101 108 115
E (cm) 58 60 62 64
F (cm) 101 106 111 116
A (cm) 164 172 180 188
B (cm) 95 102 109 116
C (cm) 83 90 97 104
D (cm) 101 108 115 122
E (cm) 58 60 62 64
F (cm) 101 106 111 116



Cloth: Tessitura – Iceland

Fibre: Cordura / DuPont

Weight: 140 g/m2

Breathability: 8000 g/m2 24h. (with Gore cup method)

Watter resistance: 200 mm


2nd Cloth: Tessitura – Power

Fibre: Cordura / DuPont

Weight: 125 g/m2

Breathability: 1000 g/m2 24h. (with Gore cup method)

Watter resistance: 800 mm

مطالب بیشتر...

  1. EOLE
  2. REVEL 2
  3. GII 2 - new gen